Portable Asbestos Mastic Removal Application Station
A portable asbestos containing mastic removal application station emits air contaminants and requires a permit to operate. The following information will assist in the completion and submittal of an application for each portable asbestos containing mastic removal application station. Each section of the page contains important information needed to process an application.
The District collects information about equipment and processes that are required to have a permit by asking for completion of application forms. These forms tell us about your operation and allow us to permit your process. It is very important that these forms are filled out completely and accurately. Errors and missing information may lead to delayed processing time and additional charges if revisions are required. Please carefully review and complete the forms. You may contact the District with any questions.
The general and equipment specific application forms must be submitted with each application packet.
The correct fee, as shown in the table(s) below, must be submitted with your application in order for it to be accepted. Please note that the fees listed in these tables are estimated and the final fee may be more or less than this amount based on time and materials spent processing the application. The District maintains work records for this purpose.
If you are unsure of the correct fee contact the District (see bottom of page) to obtain an application fee estimate to confirm the fees required for application submittal. Please note that an additional fee may also apply depending on the method of payment. A breakdown of how the application fee(s) are determined can be seen here. Additional information can be found in District Rule 40.
These fees may be paid by check payable to "Air Pollution Control District" or by credit card (Visa, MasterCard, Discover, and American Express).
If you choose to email or fax your application and intend on paying with a credit card, you must provide contact information (name and phone number) so that the District can complete payment.
Please note that credit card payments are assessed a transaction fee of 2.19% that is charged by the credit card provider.
If a piece of equipment or a process emits more than 10 pounds per day of particulate matter (PM10), oxides of nitrogen (NOx), volatile organic compounds (VOC) or oxides of sulfur (SOx), the application must include a best available control technology (BACT) analysis. The District has a BACT guide to assist with the analysis. If you have questions or need assistance reference the contact information at the bottom of this page. Please review District Rules 20.1 and 20.2.
District Rule 1200 applies to any new, relocated, or modified emission unit which may increase emissions of one or more toxic air contaminant(s). The proposed project must comply with Rule 1200. Proposed equipment may require toxics best available control technology (TBACT) depending on the project. Please review District Rule 1200 for further details.
District rules address how information that is submitted to the District is managed. District Regulation IX contains District rules 176 and 177. Please refer directly to these rules when submitting trade secret information. However, be aware that you will need to submit:
1. You must indicate on the general application form that your submittal includes trade secret information to ensure that it is not inadvertently made publicly available.
2. A letter disclosing the proprietary information. Ideally, this information should be separated from your application and clearly identifiable. This can be submitted electronically, and can be a separate submittal from the main application package.
3. A letter for the public record explaining why the information needs to be held as trade secret or is otherwise exempt from disclosure.
Applications submitted with incomplete material composition data due to failure to include proprietary information can significantly delay permit applications. In an effort to expedite the permit application process it is recommended that you contact the manufacturer or vendor of any proprietary materials that are used in the process and prepare the required letters as part of your application submittal.
In 1989, the California state legislature passed a law, AB 3205, designed to protect schoolchildren from hazardous air contaminants. The law, as currently written, requires the District to notify parents of schoolchildren, neighboring businesses and residents of all new or modified equipment that emits any hazardous air contaminant into the air which will be installed within 1,000 feet of a school site. The law also requires the District to consider any comments before authorizing construction. Please review your proposed location. If a school property boundary is located within 1,000 feet of the proposed emissions point, the AB3205 process will be initiated. This process requires a 30 day public comment period and the overall process will delay projects by at least six weeks.
10124 Old Grove Rd
San Diego, CA 92131-1649
Select equipment type applications can now be submitted online through Citizen Access. Sign up today to get connected to your applications and permits.
The District is required to act on complete applications within 180 days. If a specific turnaround time is required, discuss this with the assigned engineer. More complex processes will take longer. Ensuring your application is complete is the best way to reduce processing time. Complete emissions data is the most important factor in minimizing application processing time and iterative information requests. If you have any questions about what information is required, please contact the District using the information at the bottom of this page. Learn more about the rules that govern application processing time.
Sign up for Citizen Access to get up to date information on the status of your application.
Learn more about the application process and what to expect.
Portable Asbestos Containing Mastic Removal Application Stations may be subject to 40 CFR 61 Subpart M National Emissions Standard for Asbestos. The engineer assigned to a project will review the operations in order to determine if this regulation applies.
Several District rules may apply to your equipment. The equipment specific rule that applies to Portable Asbestos Containing Mastic Removal Application operations is Rule 66.1 Miscellaneous Surface Coating Operations and Other Processes Emitting Volatile Organic Compounds. A complete listing of the District's rules can be found here.